Uses of Package
jmri.jmrix.can

Packages that use jmri.jmrix.can

Package	Description
jmri.jmrit.symbolicprog	Basic support for advanced programming, primarily used by DecoderPro.
jmri.jmrix.can	Defines classes for interfacing to a CAN-based model railway control bus.
jmri.jmrix.can.adapters.gridconnect	Defines classes for communicating with the CAN network via hardware which uses the GridConnect format.
jmri.jmrix.can.adapters.gridconnect.can2usbino	Defines classes for interfacing to a CAN2USBino CAN adapter.
jmri.jmrix.can.adapters.gridconnect.can2usbino.serialdriver	Defines classes for interfacing to a CAN2USBino CAN adapter.
jmri.jmrix.can.adapters.gridconnect.canrs	Defines classes for interfacing to a MERG CAN-RS or CAN-USB adapter.
jmri.jmrix.can.adapters.gridconnect.canrs.serialdriver	Defines classes for interfacing to a MERG CAN-RS CAN adpater via an RS-232 line.
jmri.jmrix.can.adapters.gridconnect.canusb.serialdriver	Defines classes for interfacing to a CAN-USB CAN adapter.
jmri.jmrix.can.adapters.gridconnect.lccbuffer.serialdriver	Defines classes for interfacing to a CAN-USB CAN adapter.
jmri.jmrix.can.adapters.gridconnect.net
jmri.jmrix.can.adapters.gridconnect.pilcc.serialdriver	Defines classes for interfacing to a PI-LCC CAN adapter for LCC/OpenLCB on Raspberry Pi.
jmri.jmrix.can.adapters.gridconnect.sproggen5	Defines classes for communicating with SPROG Generation 5 hardware via a serial com port (or USB virtual COM port) with CBUS opcodes.
jmri.jmrix.can.adapters.gridconnect.sproggen5.serialdriver
jmri.jmrix.can.adapters.gridconnect.usblcc.serialdriver	Defines classes for interfacing to a CAN-USB CAN adapter.
jmri.jmrix.can.adapters.lawicell	Defines classes for communicating with the CAN network via hardware which uses the Lawicell format
jmri.jmrix.can.adapters.lawicell.canusb.serialdriver	Defines classes for interfacing to a LAWICELL CAN-USB CAN adapter.
jmri.jmrix.can.adapters.loopback	Defines classes for simulating communication with a CAN network via loopback.
jmri.jmrix.can.adapters.loopback.configurexml
jmri.jmrix.can.cbus	Defines classes for interfacing to a MERG CBUS network.
jmri.jmrix.can.cbus.eventtable	Provides an Event Table for CBUS Events..
jmri.jmrix.can.cbus.node	Provides classes for interacting with CBUS Nodes.
jmri.jmrix.can.cbus.simulator	Provides dummy CBUS network simulated objects.
jmri.jmrix.can.cbus.swing	Provides common utilities for CBUS swing classes.
jmri.jmrix.can.cbus.swing.bootloader	Defines classes for bootloader client for updating CBUS module firmware.
jmri.jmrix.can.cbus.swing.cbusslotmonitor	Provides CBUS Command Station Session Monitoring.
jmri.jmrix.can.cbus.swing.configtool	Provides a tool for creating Turnouts, Sensors and Lights from CBUS CAN Frames.
jmri.jmrix.can.cbus.swing.console	Defines classes for a console utility to interact with a MERG CBUS network
jmri.jmrix.can.cbus.swing.eventrequestmonitor	Defines classes for implementing an event table to interact with a MERG CBUS network.
jmri.jmrix.can.cbus.swing.eventtable	Defines classes for implementing an event table to interact with a MERG CBUS network.
jmri.jmrix.can.cbus.swing.hubpane	Extends OpenlcbHubPane to provide CBUS HubControl.
jmri.jmrix.can.cbus.swing.modeswitcher	Defines classes for ModeSwitcher for switching programmer and command station modes.
jmri.jmrix.can.cbus.swing.modules	Provides a tool for creating and linking Events between modules connected to a CBUS network.
jmri.jmrix.can.cbus.swing.modules.base
jmri.jmrix.can.cbus.swing.modules.merg
jmri.jmrix.can.cbus.swing.modules.sprogdcc
jmri.jmrix.can.cbus.swing.nodeconfig	Provides CBUS Node Configuration Tools.
jmri.jmrix.can.cbus.swing.simulator	Provides swing UI for CBUS network simulation tools.
jmri.jmrix.can.nmranet	Defines classes for interfacing to a NMRAnet network.
jmri.jmrix.can.nmranet.swing
jmri.jmrix.can.swing	Provides Swing-based GUI tools for general CAN connections.
jmri.jmrix.can.swing.monitor
jmri.jmrix.can.swing.send	Provide a tool for sending CAN packets.
jmri.jmrix.openlcb	Implementation of the JMRI OpenLCB hardware interface.
jmri.jmrix.openlcb.configurexml
jmri.jmrix.openlcb.swing	Head package for Swing-based packages for JMRI's OpenLCB implementation.
jmri.jmrix.openlcb.swing.downloader	Provides a download (bootload) tool for OpenLCB nodes.
jmri.jmrix.openlcb.swing.eventtable	Provides a table showing relationships among Nodes, Event Producers and Event Consumers
jmri.jmrix.openlcb.swing.hub
jmri.jmrix.openlcb.swing.idtool
jmri.jmrix.openlcb.swing.memtool	Provides a tool for manipulating node memory
jmri.jmrix.openlcb.swing.monitor
jmri.jmrix.openlcb.swing.networktree
jmri.jmrix.openlcb.swing.protocoloptions
jmri.jmrix.openlcb.swing.send	Provide a developer tool for sending OpenLCB CAN packets.
jmri.jmrix.openlcb.swing.stleditor	Provides a tool for editing the STL logic introduced with the Tower LCC+Q

Classes in jmri.jmrix.can used by jmri.jmrit.symbolicprog

Class	Description
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can

Class	Description
AbstractCanTrafficController	Abstract base for TrafficControllers in a CANbus based Message/Reply protocol.
CanFrame	Base interface for immutable messages in a CANbus based message/reply protocol.
CanInterface	Define interface for sending and receiving CAN messages
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanMutableFrame	Base interface for mutable messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.
ConfigurationManager	Does configuration for various CAN-based communications implementations.
ConfigurationManager.ProgModeSwitch	Enumerate support for switching programming modes in connected hardware
ConfigurationManager.SubProtocol
TrafficController	Traffic controller for CAN access.

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect

Class	Description
AbstractCanTrafficController	Abstract base for TrafficControllers in a CANbus based Message/Reply protocol.
Bundle
CanInterface	Define interface for sending and receiving CAN messages
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.
TrafficController	Traffic controller for CAN access.

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.can2usbino

Class	Description
CanMessage	Base class for messages in a CANbus based message/reply protocol.

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.can2usbino.serialdriver

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.canrs

Class	Description
AbstractCanTrafficController	Abstract base for TrafficControllers in a CANbus based Message/Reply protocol.
CanInterface	Define interface for sending and receiving CAN messages
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
TrafficController	Traffic controller for CAN access.

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.canrs.serialdriver

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.canusb.serialdriver

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.lccbuffer.serialdriver

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.net

Class	Description
Bundle
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.pilcc.serialdriver

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.sproggen5

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.sproggen5.serialdriver

Class	Description
Bundle
ConfigurationManager.ProgModeSwitch	Enumerate support for switching programming modes in connected hardware

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.gridconnect.usblcc.serialdriver

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.lawicell

Class	Description
AbstractCanTrafficController	Abstract base for TrafficControllers in a CANbus based Message/Reply protocol.
Bundle
CanInterface	Define interface for sending and receiving CAN messages
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.
TrafficController	Traffic controller for CAN access.

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.lawicell.canusb.serialdriver

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.loopback

Class	Description
AbstractCanTrafficController	Abstract base for TrafficControllers in a CANbus based Message/Reply protocol.
Bundle
CanInterface	Define interface for sending and receiving CAN messages
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.
TrafficController	Traffic controller for CAN access.

Classes in jmri.jmrix.can used by jmri.jmrix.can.adapters.loopback.configurexml

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus

Class	Description
Bundle
CanFrame	Base interface for immutable messages in a CANbus based message/reply protocol.
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.
ConfigurationManager	Does configuration for various CAN-based communications implementations.
TrafficController	Traffic controller for CAN access.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.eventtable

Class	Description
Bundle
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.node

Class	Description
Bundle
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.simulator

Class	Description
Bundle
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing

Class	Description
Bundle
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.bootloader

Class	Description
Bundle
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.cbusslotmonitor

Class	Description
Bundle
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.configtool

Class	Description
Bundle
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.console

Class	Description
Bundle
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.
TrafficController	Traffic controller for CAN access.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.eventrequestmonitor

Class	Description
Bundle
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.eventtable

Class	Description
Bundle
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.hubpane

Class	Description
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.modeswitcher

Class	Description
Bundle
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.
ConfigurationManager.ProgModeSwitch	Enumerate support for switching programming modes in connected hardware
TrafficController	Traffic controller for CAN access.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.modules

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.modules.base

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.modules.merg

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.modules.sprogdcc

Class	Description
Bundle

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.nodeconfig

Class	Description
Bundle
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.cbus.swing.simulator

Class	Description
Bundle
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.nmranet

Class	Description
Bundle
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.
ConfigurationManager	Does configuration for various CAN-based communications implementations.

Classes in jmri.jmrix.can used by jmri.jmrix.can.nmranet.swing

Class	Description
Bundle
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.swing

Class	Description
Bundle
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.swing.monitor

Class	Description
Bundle
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.can.swing.send

Class	Description
Bundle
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb

Class	Description
CanFrame	Base interface for immutable messages in a CANbus based message/reply protocol.
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.
ConfigurationManager	Does configuration for various CAN-based communications implementations.
TrafficController	Traffic controller for CAN access.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.configurexml

Class	Description
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing

Class	Description
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing.downloader

Class	Description
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing.eventtable

Class	Description
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing.hub

Class	Description
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing.idtool

Class	Description
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing.memtool

Class	Description
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing.monitor

Class	Description
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing.networktree

Class	Description
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing.protocoloptions

Class	Description
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing.send

Class	Description
CanListener	Defines the interface for listening to CAN messages.
CanMessage	Base class for messages in a CANbus based message/reply protocol.
CanReply	Base class for replies in a CANbus based message/reply protocol.
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.

Classes in jmri.jmrix.can used by jmri.jmrix.openlcb.swing.stleditor

Class	Description
CanSystemConnectionMemo	Lightweight class to denote that a system is active, and provide general information.